I spend a lot of time at keyboards. Typing blog posts, emails you name it. So finding the best keyboard out there is always something I look for. To top it off I have a bunch of devices I use everyday from a Windows laptop to an iPhone to an iPad. Now the easiest solution is one keyboard per device. But this keyboard offers the possibility of covering off 3 devices at a time. Its the party trick it brings to the table.
Up in the top left corner of the keyboard you will see a dial, this allows you to pair and then select from three different devices to talk to. And each device can be uniquely configured as iOS/Mac or PC/Android which customizes the special keys. The special keys are all here from the windows key (cleverly mascarading as a start button?) to the options key on Mac. Start f1 on iOS performs a home function for an iPhone/iPad. Alt/tab functionality works perfectly on an iPad (sadly this function is not built into an iPhone) which allows you to quickly switch between apps.
Switching between devices is fairly quick, takes about 1-2 seconds to have it register. Not instant but not horrible either. I did find myself forgetting which device I was set to and typing on the wrong screen
The keyboard also has a nice slot to hold your iPhone/iPad.
Physically speaking if your looking for the perfect travel mate, this isn’t it. It’s a big bruiser.
Height: 7.68 in (195 mm)
Width: 11.77 in (299 mm)
Depth: 0.79 in (20 mm)
Weight: 820 g (1.81 pounds)
It is powered by a pair of AAA batteries. Given the size of this keyboard why it doesn’t use a rechargeable or AA batteries is beyond me.
I made a mistake and tried pairing it as an iOS device on Windows and it cleverly came up and told me I’d selected it wrongly. I had to delete it and repair it.
Pairing went super smoothly.
The battery level can be seen inside the optionally downloaded ap on the PC, but there is no iPhone or iPad app (there is Android). So without that your guessing the current battery level. The app will also allow you to change some options on the keyboard.
The power switch on the keyboard is oddly located on the underside of the keyboard. A silly decision and give the size of this bruiser it is perplexing why they would do that.
Feel wise the keyboard reminds me of an older chicklet style keyboard. It does not in all honesty have a great feel. Accuracy wise it is ok but not perfect. The lack of feedback from the keyboard means mashing the keys or making mistakes. It is really not a great feel.
Logitech wisely put rubber feet on the bottom of the keyboard and it works well to keep it in place.
There are some curiously missing keys: Page Up/Down, Home/End all of which I use often …
So all in all a great idea, marred by a cheap chicklet feel. Honestly I would not recommend it.
I’ve reviewed a couple of external batteries lately, pokemon Go is a HUGE power draw. Most people that are as addicted as I am walk around with a power bank in their pocket (or two) and a cable to the phone. Onto this one. So far I’ve been impressed by Aukey …
This one is reasonably small and light but they manage to pack in 5000 mAh worth of power. On the output spec it can pump out 5V 2A which is needed for Android phones and some iPads. My iPhone 6 can’t use the 2A, but this makes it more flexible. The only thing missing (spec wise) is qualcom quick charge that would add 9 and 12V output options for even faster charges.
The unit does not have a charge indicator (other than one LED that changes color based on the charge, red bad, green ok, blue good?), nor does it have an LED that could be used as a flashlight. Why this isn’t on every one of these devices is beyond me.
Input wise it can suck back in 2A for faster recharges.
On my iPhone 6 I was able to get 2 full charges out of it. It pumps out a steady 1A into the iPhone. This would amount to about 75% efficient. Not bad at all.
Recharge time was about 3 hours from dead. Not super quick but reasonable.
The charger does not support pass through so you will need to add a cable just to charge the external battery.
My good friend Lance was wandering through a park and tripped over one of these, so he gave it to me to play with. Searching the web says it’s not uncommon for these to become parted from their owners. Like most other trackers it does not alert you when it becomes disconnected from the phone. Also like other trackers, when you link a found tracker up with your phone it makes no attempt to reunite it with it’s former owner.
The MiBand (first gen) is a super cheap, Chinese activity tracker, think like $20 on Amazon. And it looks every bit as cheap as it is IMHO. So let’s see what we have. Delving into the app you find some interesting artifacts of Chinese all over the place. And it seems China has no idea Canada is a country when you go to setup it’s region. Ok so I guess I’m an American? Setup requires you to give it your phone number and a password to create an account. It then sends you a text with a passcode you enter and your done. Then you enter the usual handful of personal stats, age, sex, weight height etc. The app kept finding a firmware update was needed but it kept failing with no hint of why.
Like other activity trackers it tracks steps (which get converted into kms and calories) and sleep. Interestingly the calories do not include basal calories (active calories only), something I wish others would do. There is no move reminder. As an example Mi Vs Fitbit Flex: Steps 14519 vs 16230 (-11%), Kms 10.5 Vs 11.95 (-12%) calorie count is 580 Vs 2634, but when you remove basal of 1200 it compares with 1434. So other than calories the Mi does an admiral job of step counting. Especially when you include the price!
Sleep tracking is extremely basic and only tells you the time you were in bed and the time you were in deep sleep with light sleep being the left over. Nothing about how many times you were restless etc.
Comparing the Mi to Fitbit flex time in bed: 6.3 hrs Vs 6.9 (-9%). Again not a bad at all.
There does not seem to be a portal to view your stats on, so your limited to it on your device, I also see no way to export the data. The data can be fed into Apple health, a nice surprise and something Fitbit choose to not do.
Notifications (on an iPhone) for phone calls and alarms can be turned on in which case it vibrates quite noticeably, but the default is this is off, and no other notificatons come through to the tracker. Likely to preserve battery life.
There is a find your tracker function, in which case it buzzes if it is in bluetooth range.
The Mi unlike the Fitbits tell you clearly when you last charged it and the exact battery percentage. In 2days it went down a mere 8% which would project out to 25 days which is HUGELY impressive. My Flex gets about 7.
The app is basic, there’s no portal, and no way to export but if your looking for a budget tracker this is a much better choice than I anticipated. If they added full notifications it would present an additional use case for the device.
Hot no the heals of the Fenix 2 I decided to return it and try the Fenix 3, I was that impressed with it.
The Fenix 3 comes in a host of different models to suit your tastes, and budget. Everything from the bottom end Fenix 3 to the Sapphire all the way up to the Sapphire HR (heart rate). I really had to push my mental limits on price for a watch to reach for this model. I bought it from GPSCity refurb for $529. The difference in price between the Fenix 3 and Sapphire was only $50 and changes to a metal band (although a rubber is included to swap out) and the crystal is a more durable sapphire. So I splurged.
A number of folks may only read this post so I will do it as a stand alone post. For those of you that read the Fenix 2 there will be some overlap, sorry about that.
My use case for this device is potentially an everyday watch, activity tracker, as well as use in sports such as hiking, biking and kayaking.
On with the write up. This is definitely a big watch. I have a small wrist and it’s noticeable. It looks a whole lot more elegant than the Fenix 2 but still noticeable as a sports watch. The metal band that is on the Sapphire is really quite heavy. Top that off with the fact that it is not possible to use the metal band with a handlebar mount and you have an issue. Fortunately they did include a normal rubber band and the screw drivers to change the band. Changing the band is a quick and easy task. I would have preferred that they included a spare set of pins but they did not.
The Fenix 3 includes a dizzying array of sensors (same ones as on the Fenix 2), a digital compass, a barometric altimeter, temperature sensor, gps and accelerometers. All packed in a watch. Without the metal band the weight is not that bad, 85g, the metal band weighs in at over 90g on it’s own. And it is actually possible to wear it sleeping. Even on my small wrist. As with any metal band you will need tools to get it sized right for you. Or take it to a jewler. Be sure and watch the direction you need to push the pins out to remove them, it is marked on the under side of the band.
On initial setup on the watch you have to enter your age/weight/sex etc. I guess this is in case you are going to use the watch face without a phone/computer but this just seems like a silly step.
The Fenix 3 uses a very different kind of screen which they refer to as “1.2-inch sunlight readable Garmin Chroma Display”. It’s focus is two fold, make it readable always (sometimes requiring a backlight), and consume as little power as possible. This is a color screen, but just barely. Don’t go looking for a bright vibrant Apple watch or Samsung Gear like screen. Colors are dull and washed out. That is not the focus point of this watch. It is generally a good display, although I am not sure I like it more than the Fenix 2’s …
The backlight on the Fenix 3 now has a setting that anytime you push a button it comes on. Brilliant (and obvious at the same time). Timeout can be set to anything you want, including always on which I am sure will have dramatic effects on the battery and be a good size distraction while your trying to sleep. I wish they had a setting for on during workouts. This would be handy for when in the forest mountain biking or anywhere there is low light.
The watch is controlled by a series of large buttons around the edge of the watch. This is not a touch screen. This is in keeping with the primary purpose of the watch which is a GPS watch. The buttons have a much nicer feel than the Fenix 2 and can be managed with some light gloves.
One of the major improvements for the Fenix 3 is the addition of support for Connect IQ. This is Garmin’s extensible architecture that allows third parties to release there own apps, widgets (data fields for the watch faces), watch faces and data fields (for use in activity screens). Connect IQ is managed from the Garmin connect app on your phone that then sends them over to the watch. Connect IQ support is a HUGE move for Garmin. I love the idea of it but Garmin seems to have SEVERELY limited Connect IQ. You can only have a set number of “open slots” that you can install these into and only so much space for them. Garmin gave you an area to manage the storage which shows you within the phone app how much storage and slots are available but you can not uninstall from this same screen. Clumsy. And the built in Garmin apps/widgets etc can be disabled but do not free up space. I had some challenges trying to figure out how to add back an app I had removed/hidden. Turns out its done on the watch not the phone. And try and uninstall from the phone your current watch face and you get a nasty failed message with no hints as to why. And once you’ve downloaded to your phone a particular app/widget etc they remain on your phone cluttering your lists indefinitely. As a neat freak this is troubling. I know get over it, but really Garmin could have done a much better job of this. I have to say the way it’s done takes a lot of the excitement of having this wonderful and extensible feature. Dear Mr Garmin … please please pretty please work on Connect IQ. Signed your loyal customer 🙂 I do digress .. Oh and be aware that installing these apps/widgets etc while your fussing with a bunch of them really can smoke your battery fast … I had an issue that deleting watch faces was not freeing up slots to install another one, this was only resolved by a reboot of the watch. Oddly also missing is the ability to change the watch face from the phone, it can only be done on the watch. And on the watch there’s no preview so your stuck finding the name of the watch face on the watch and then finding it on the watch. Again, clumsy …
I love the ability to get different watch faces. I found the device and it’s screen lend itself far better to digital rather than analog ones. There are about 900 different watch faces out at time of writing. Here are some of my favorites:
Steam Guage X-WF GNX Digits Ab Initio LCD Digits
There are watch faces that display your heart rate, but these seem to only work with the Fenix’s with heart rate monitor built in. It will not try and connect to an ANT+ heart rate monitor. Similarly there do not seem to be built in apps that will just display the ant+ heart rate data outside of an activity. I did find a third party app that will give you current, min and max heart rate as an activity of it’s own Cardiometer
The Fenix 3 can do complete activity tracking including steps (that gets translated into kms and calories), floors climbed and descended (first time I’ve seen the ability to differentiate between ascend/descend, likely because of the barometric altimeter) and sleep. Steps and kms compared well with my Fitbit however calories are obviously calculated differently between the companies as they varied by over 20% with Fitbit being higher. Sleep stats are very basic but they are there. The watch can easily be worn while sleeping. Garmin even included move reminders, something Fitbit are still struggling to get on more than there newest devices. Like most of these devices they have forgot to pause step counts while in a workout, so I did a ride and it detected a thousands of steps 😦 Just difficult can it be to get this right?
I did notice one really stupid thing. I took the watch off, went to bed and picked up the next morning. As far as it was concerned I had slept 100% the entire time. Doh. Dumb. Oh and Garmin automatically mutes notifications when it detects sleep, brilliant, however they seem to have thought of the possibility of taking it off to sleep and notifications just kept coming, waking me up. Doh, again dumb. The easiest solution to this is to turn on do not disturb mode on the watch and set your sleep time in the phone app (settings, user settings normal bed times). This does cause another issue, if you dont wear the watch while sleeping but it’s on and you have set the normal sleep time connect logs your normal sleep time in Apple health. And I woke up, took the watch off to shower and it thought I had been asleep the time I was in the shower. All in all the sleep area of the watch could use some attention.
Using Garmin Basecamp I was able to transfer waypoint between my other Garmin devices over USB. In fact from what I can see USB is the ONLY way to get waypoints/courses etc to the Fenix 3, you can’t do it over bluetooth or wifi (Fenix 2 was the same by the way). Unlike the Fenix 2 which slowed down when the waypoints got loaded up the Fenix 3 is fine. Waypoints are again sorted by proximity (to your last known location) and there’s no option for alphabetic. Waypoints are now called saved locations rather than user data as they were on the Fenix 2. Makes more sense.
When the watch is being used every day you have access to the altimeter, barometer and compass using the up and down arrow from the time. Garmin created a one screen app that is too confusing for me called ABC. Fortunately you can disable it and have access to each on their own screen. The compass doesn’t include an arrow to north, instead gives you the degrees. Not my preference but heh …
I couldn’t for the life of me get the Garmin weather app to work and lots of people complain about it so …
Watch wise Garmin have hit all the marks with multiple alarms, a stopwatch, and count down timer. You can also create a hotkey shortcut to the count down timer which shortens the number of clicks to get to it. Very convenient. Setting the countdown timer is a little clumsy but not unmanageable.
Garmin oddly refer to activities as apps. You can control which activities the watch displays and can add new ones. For each activity you define the set of screens that will be displayed during that activity. If you don’t add that screen to the activity’s definition you can’t get to it. To get back to the time/apps off the main screen press and hold the down button, then press back to go back to your app. Oddly a visual compass does not seem to be available within a workout but there are ones in the Connect IQ store.
My fav is Compass data field
Heart rate alerts have been improved. Setting them is a bit bizarre they give you two thumbwheels to set your min/max (for custom). One has two digits and one has one. So to set 180 you set 18 on the one and 0 on the other. It confused me at first. Once set it works absolutely perfectly. It beeps, flashes the screen and pops the heart rate screen on for you to see. Very well done.
While in an activity (or not) you can start navigation to a pre-saved point or back to start or track back. Saved locations as mentioned above are sorted based on closest to your current location. Once you sort through your waypoints, and this watch can store 1000 (wow) you are ready to navigate to it. Garmin have dramatically improved the navigation screen. Navigation now becomes an added screen on your existing activity (rather than a separate activity as it was on the Fenix 2). On this screen you get an arrow to your destination and the distance to it (albeit in a super small font) on one screen. There’s a fair bit of wasted white space on the screen not sure Garmin didn’t make more efficient use of the space with bigger font/arrow.
When on other screens you get a little arrow showing you constantly the direction to your waypoint. Wow. I am thoroughly impressed by how well they have done this. Thanks Garmin you have restored my faith in you! The map of your current activity is also super easy to read with a nice wide track of where you have been and is easy to see. A really huge improvement
While in an activity you can press and hold the down button and get taken back to the time of day, and can then call up things like the music app, ABC etc. The music app by the way is super basic and even a little clumsy. You can use it to start stop etc the music. It works fine but don’t go looking for song playing etc it’s just not there.
Activities saved can be uploaded through the phone (through bluetooth, so be patient this can take minutes to complete) or you can set them to auto upload using WIFI in which case magic happens and it just works. Next thing you know the activity is on Garmin connect. It seemed to get the password for the WIFI from the phone. This is SUPER convenient.
From a biking point of view you the Fenix 3 supports speed/cadence sensors. There’s no explicit mention of a speed only or cadence only sensor but I believe it supports it. Standing still and spinning the wheel shows a speed so I am pretty sure it uses the wheel sensor to determine speed/distance when available (yay).
Sensor wise you can have multiple sensors in each category. You can manually rename them to something that is more meaningful rather than some silly number of digits. Sensors can easily be added/deleted, something that was an issue on previous Garmin devices. All in all the management of the sensor pool is well done. One odd thing though is there is no way to tell it for an activity to ignore sensors. As soon as you start an activity it attempts to connect to various sensors. The only exception to this is you can decide to turn off the GPS for a particular activity such as an indoor one. Garmin as always support only ANT+ sensors (not bluetooth), but you can always buy dual mode sensors (bluetooth and ANT+) such as the Wahoo Blue SC, Speed or Tickr heart rate monitor.
Battery life on this watch is dependent on what your doing with it. GPS mode draws the most. Watch mode the least. Measuring actual battery life is very difficult unless you dedicate time to doing just measuring the battery life ie not using the watch. So I don’t have actual numbers for you. Garmin claim up to 50 hours in UltraTrac mode; up to 20 hours in GPS training mode; up to 6 weeks in watch mode. I can’t think of too many devices with that can compete with this. Using this device all day while snowboarding/skiing is very possible. Recharge time from dead is a little over 2 hours so not horrible, and is about half of what the Fenix 2 took. In about 2.5 hours the watch dropped a whopping 22% so that would translate out to about 11.3 hours. Way below the 20 hours they quote and well above the Fenix 2.
Garmin include Livetracking which allow you to share your current location, speed distance etc from your current activity. This can be shared over email facebook etc.
Garmin have included functions to find your phone from your watch and your watch from your phone. Assuming it is within Bluetooth range. They do not appear to have included a last seen location for your watch should you loose it. Something Motorola does.
Garmin have included a search utility to find friends, but it found only one. I know others using Garmin connect so I have no idea why …
Notifications are pretty well done on the Fenix 3. You get a nice little buzz on your wrist then the message pops up on the screen (in albeit small font size, unchangeable). This is comprehensive and covers all notifications on iOS including phone calls. You can even decline this phone call from the wathc. This works well and is super convenient while in the middle of a ride. They also notify you when it’s time to get off your butt 🙂 The notifications come up nicely within a ride but the font is so small as to be unreadable. But they go away quickly.
Garmin wisely included the ability to power off the watch. This allows you to power it off and come back to it the next time you want it and it’s all powered up ready to go. A number of others forget this super obvious function. Some people do have more than one watch you know. No really they do!
There are a dizzying array of things to setup on the Fenix 3. And pretty much every one of them have to be setup on the watch itself (can’t be setup on the phone) and none of them can be backed up. Seems like an odd oversight.
There are definitely things that annoy me with the Fenix 3. The menu system and change of buttons from past devices being just a few. But even with that I have to admit this is an amazing watch. If you have a loved one that is into gadgets and like physical activity this may be the perfect decadent toy for them. Will it change your life, well no, but it real is a wonderful piece of technology!
For another even more in depth review checkout DC Rainmer’s review. Always one of the first places I go to for fitness based tech!
I wrote up another post on how to make courses and navigate on the Fenix 3. Check it out.
I’ve now owned the Fenix 3 for about 5 months now. I have to say, I love this device. It really is a super watch. It performs smartphone notifications, talks to all my cycling sensors, can be mounted on a handlebar (with the rubber band and the optional handlebar mount), can be used for navigation, does activity tracking, the app is pretty good, and battery life is also good. If there is anything missing it is a heart rate sensor. I made a choice to not buy the Fenix 3 HR, given the additional price. This would give you two options. An always with you heart rate monitor for use on activities, and 24×7 heart rate monitoring. As it happens Garmin only periodically check the heart rate (According to DC Rainmaker) so this is not all that useful. And if I am going for ride, I need more accuracy than the wrist mounted would give me anyway. Now at this point the Fenix 5 is out (there is no such thing as the Fenix 4). So what would the Fenix 5 give you that the 3 doesn’t? Garmin now properly do 24×7 heart rate monitoring giving you more accurate resting heart rate numbers. Also, recently Garmin updated Connect IQ and sadly the Fenix 3 was left off the list. A rather troubling move. This means, going forward not all widgets/watch faces will work on the Fenix 3. The Fenix 5 also moved to a more convenient quick connect watch band, a welcome improvement. Fortunately these same bands work on the Fenix 3. Is it worth the additional cash to go for the 5? That’s up to you …
- Garmin Fenix 3 navigation
- Storage pools
- Xiaomi Band 2 review
- Pokemon Gen 2 changes
- Home power line adapters
- Converting old home movies
- Here a tracker there a tracker … Apple Health to the rescue?
- Misfit Shine
- Windows 10 Lock screen Spotlight images
- Today’s lighting market
- Logitech K480 multi device keyboard
- Aukey 5000 mAh external battery